Important Safety Instructions
To reduce the risk of Fire, Electrical Shock, or
Injury to Persons:
replacing bulb.
2. Bulb gets HOT quickly! Contact only switch
when turning on.
3.Do not touch hot lens or enclosure.
4. Do not remain in light if skin feels warm.
6. Keep away from materials that may burn.
7. Use only with the appropriate wattage bulb for the fixture.
8. Do not touch the bulb at any time.
Use a soft cloth. Oil from skin may damage bulb.
Warning: Lighted Lamp is Hot!
• Check that fixture is Not Used as splice compartment
• Inspect the condition of the lamp porcelain. Do Not Use if cracked or broken.
• Check to see that lamp voltage matches supply voltage.
• For best performance follow lamp manufacturer's instructions.
NOTE: Lamp must be within 4° horizontal for best operating performances.
Installing Lamp:
To ease the lamping of this quartz fixture, one of the lamp sokets ( the left socket when fixture is facing you) is spring retractable.
1. Fit lamp into right-hand socket.
2. While holding lamp in the right-hand socket, pull back the left-hand spring socket.
3. Fit the other end of the lamp into the retracted left-hand socket, then gently release the spring.(Do Not allow socket to bang against lamp.)
4. Gently move the lamp against socket contacts to assure proper seating.
NOTE: Do not touch glass envelope of lamp. Use tissue or cloth.
