Standard Sizes For Roll-Off Compaction Containers
| Capacity | Length/Width/Height | Approx Weight |
| 20 CU YD | 16’ x 8’ x 66" | 5275# |
| 30 CU YD | 20’ x 8’ x 75" | 6650 |
| 35 CU YD | 22’ x 8’ x 78" | 7275 |
| 40 CU YD | 22’ x 8’ x 90" | 7750 |
| 45 CU YD | 24’ x 8’ x 90" | 8425 |
Standard Colrs: Dark Blue, Dark Green, Red, Black, Orange, Brown, White, Dark Gray, Burgundy, Medium Blue, Medium Green, Medium Gray, Beige.
Note: Scrathces Will Occur During Loading and Unloading
Specifications For Roll-Off Compaction Containers
Floor
Floor Plate • 3/16" Plate, One Piece
Understructure • 3" Structural Channel on 16" Spacing
Long Rails • 6" x 2" x 3/16" Structural Tube with Tapered Solid Steel Billnose, and 3/16" PLate Gusstes Ebery Other Crossmember
Wheels • Four 8" x 10" Heavy Duty
Rollers • 4" Diameter, Greasable x 6" Long Heavy-Duty
Hook-Plate • 3/4" Plate 12"
x 36", Fully-Welded Rail to Rail, with 1-1/4" High-Tensile Cable
Hook, Inserted Thru Locked In and Fully-Welded. Lifetime Guarantee
Sides
Side/Roof Sheets • 11 Guage Plate Fully-Welded Top and Bottom
Side/Roof Posts • 5" x 3"
x 11 Gauge Four-Way Formed Tubes on 20" Centers with Drain Holes,
Fully welded Top and Bottom
Rear Posts • 7" x 4" x 3/16" Three-Way Formed Tube
Tailgate
Tailgate Sheet • 11 Gauge Plate
Framing • 4" x 3" x 11 Gauge Structural Tube, Rests on Floor
Reinforcing •4" x 3" x 11 Gauge Structural Tube and 3Ó Structural Channel
Hinges • 1/2" PLate with 1-1/4" Pin, Greasable
Latch • Heavy-Duty Vertical Lift System
Bulkhead
Bulkhead Sheet • 10 Gauge
Plate Fully-Welded and Reoinforced with 4" x 3" x 11 Gauge
Structural Channel
Doghouse • 10 Gauge Plate Full-Width Reinforced Cleanout
Verticals • 6" Structural Channel
Crash Plate • 1/4" Plate, Reinforced with 1/4" Plate Formed Channel
Options In Roll-Off Compaction Containers
12’ –22’ Roll-Off Open Top Container Options List Applies.