Major Services Offered

• Through hole printed circuit board assembly
• Cable and harness assembly
• Subassembly and OEM assembly
  
  

We encourage sample, prototype and engineering run quantities

Quality Control

Scope
These procedures establish requirements for the quality control system utilized by Ross Industries Inc, and define responsibilities for ensuring the quality of our product and related services.

Application
These requirements shall apply to all parts produced by
Ross Industries, Inc..

Waivers and Alterations
Waivers and alterations to any portion requirements shall be specifically noted and approved by plant management as well as executive management.

Precedence
Blueprints, engineering specifications, purchase order requirements, and individual quality specifications shall take precedence over these procedures whenever conflicting requirements exist.

General Requirements
The quality and control system shall provide that defects or other unsatisfactory conditions are discovered and corrected at the earliest practical point Ross Industries, Inc. operated on the premise that all defects have been discovered and removed from the shipment.

Station Operators
Each operator is responsible for the quality of product passing through their particular station. Each operator shall work only with lots. No lot will move to the next station until the entire lot has been completed by the station operator. Each operator must sign and date each lot card and account for any scrap or defects within the lot before moving the lot to the next station.

Inspection
All in-process and final inspection procedures shall meet a C-O criteria. The sampling plan shall be in accordance with MIL-STD-105. All Inspected shall contain zero defects within the sample size. Any single defect within a lot is cause for rejection of that lot. Further, all rejected lots shall be traced to the operator and corrective action taken to ensure conformance of future lots. Inspection plans and reports shall be completed for each lot at final inspection. These records shall be maintained for an indefinite period of time.